Cab Component Installation; Install The Node Harness - Raven SmarTrax Installation Manual
Rogator rg900, rg1100, and rg1300
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
CHAPTER
4
Install the Node Harness
Remove the access panel cover on the outside right-rear corner of the cab.
1.
Node Harness Routed into Cab
FIGURE 1.
Route the two large, rectangular connectors of the node harness (P/N 115-2001-052) into the machine's
2.
cab through the access hole.
Remove the bulkhead plug from the cab floor in the right-rear corner of the cab.
3.
Manual No. 016-4001-090 Rev. B
C ab Component
C h a p t e r 4
Installation
19
Advertisement
Table of Contents
