Chapter 3
Install Fittings in the SmarTrax Valve
Before mounting the SmarTrax valve (P/N 063-0131-129) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Fittings Installed in the SmarTrax Valve
FIGURE 1.
Fitting - -6 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -4 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Transducer - 0-3000 PSI Pressure
10
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting
RoGator RG900, RG1100, and RG1300 SmarTrax™ Installation Manual
NOTICE
Part Number
333-0012-084
333-0012-195
422-0000-086
Port
A, B
P, T
LS STEER
LSPV
PS