Raven SmarTrax Installation Manual page 26

Chapter 4
SmarTrax Node Installed
FIGURE 7.
Mount the node mounting plate to the standoffs on the panel to the right of the operator's seat using two M6
2.
x 1.0 x 20 mm hex bolts (P/N P/N 311-0070-010) and two M6 split lock washers (P/N 313-1000-017).
Note:
The mounting plate should be oriented so that the node connectors point toward the front of the
machine.
Node Harness Connected to Node
FIGURE 8.
Connect the node connectors from the node harness (P/N 115-2001-052) into the correct ports of the
3.
SmarTrax node.
Tighten the bolts on the node connectors to secure the connections.
4.
22 RoGator RG900, RG1100, and RG1300 SmarTrax™ Installation Manual