Installing Hydraulic Hoses - Raven SmarTrax Installation Manual

Chapter 4

Installing Hydraulic Hoses

Open the engine bay cover and remove the guards or plates in front of the cab which may hinder access to
1.
the steering orbitrol motor.
Steering Orbitrol Motor Location
FIGURE 1.
Label the existing hoses and corresponding ports on the steering orbitrol motor. It may be necessary to
2.
trace the lines to the steering cylinders, hydraulic pump and tank to determine labeling of each hose and
port.
Note:
Refer to the label on the orbitrol motor to ensure each hose is labeled properly.
12
NOTICE
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Steering Orbitrol Motor
Ag-Chem RoGator 84/86C Series SmarTrax Installation Manual