Side Stand; Suspension - KYMCO MYROAD 700i Service Manual

3
. INSPECTION/ADJUSTMENT

SIDE STAND

Support the scooter on a level surface.
Check the side stand spring for fatigue or
damage.
Check the side stand assembly for smooth
movement and lubricate the side stand pivot
if necessary.
Check the side stand ignition cut-off system:
Start the engine.
Fully lower the side stand while running
the engine.
The engine should stop as the side stand is
lowered.
If there is a problem with the system, check
the side stand switch.

SUSPENSION

FRONT SUSPENSION INSPECTION
Check the action of the forks by operating the
front brakes and compressing the front
suspension several times.
Check the entire assembly for signs of leaks,
damage or loose fasteners.
Replace damaged components which cannot
be repaired.
Tighten all nuts and bolts.
3-23
MYROAD 700i