14. HANDLEBAR/FRONT WHEEL/FRONT BRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
FRONT BRAKE FLUID
FLUID REPLACEMENT/AIR
BLEEDING
*
● A contaminated brake disc or pad
reduces
stopping
contaminated
contaminated disc with a high quality
brake degreasing agent.
● Do not allow foreign material to enter
the system when filling the reservoir.
● Avoid spilling brake fluid on painted,
plastic or rubber parts. Place a rag over
these parts whenever the system is
serviced.
BRAKE FLUID DRAINING
Make sure that the master cylinder parallel to
the ground before removing the reservoir
cover.
Remove two screws.
Remove the reservoir cover, diaphragm plate
and diaphragm.
Connect a bleed hose to the bleed valve.
14-9
power.
Discard
pads
and
clean
a
X-Town300 ABS