Flywheel, Replacing - Volvo Penta TAD1630G Workshop Manual

Service procedures - engine

Flywheel, replacing

(Clutch removed)
1
Remove the flywheel bolts.
2
Screw two bolts into the flywheel.
3
Using the bolts, lift off the flywheel.
4
Clean the crankshaft flange contact surface.
5
Check the guide pin, replace it if damaged.
6
Clean the flywheel contact surface which mates with the
crankshaft flange. Fit a new flywheel bearing (Power Pack
engines).
72
7
Fit the flywheel and the bolts.
8
Torque the flywheel to 260 Nm (191.8 ft-lb).
Group 21