Cylinder Head, Disassembling - Volvo Penta TAD1630G Workshop Manual

Service procedures - engine
6
Remove all sealing rings from the cylinder block.
7
Attach 999 6966 (two) to hold the cylinder liner.
24

Cylinder head, disassembling

1
Remove the valves and valve springs. Use a valve spring
clamp to compress the springs for removal of the valve col-
lets.
2
Put the valves in a valve stand in the order they were fitted in
the engine.
3
Clean all parts. Take particular care with the ducts for oil and
coolant. Carry out a leakage test.
Group 21