Volvo Penta TAD1630G Workshop Manual page 12

General information
Location of identification
plates
Each engine is supplied with two identical identification
plates, of which one is mounted on the cylinder block, see
figure.
The other identification plate should be mounted in a
suitable location adjacent to the engine.
1. Engine model
2. Spec. no.
3. Serial no.
4. Rated net power (without fan)
5. Rated net power (with fan)
6. Max. rpm
7. Prelift/Inj. timing T–Turbo charged
10
Key to engine model:
For example: TAD1630GE
T – Turboalimentado
A – Air-to-air charge air cooler
I – Intercooler
W – Water-to-air charge air cooler
D – Diesel engine
16 – Displacement, liters
3 – Generation
0 – Version
P – Stationary engine (Power Pac)
G – Gen Set Engine
H – Raised engine output
V – Engine for stationary and mobile operation
M – Engine for mobile operation
E – Low emission engine
Group 20