Injection Pump, Setting With Measuring Tool 998 7057 - Volvo Penta TAD1630G Workshop Manual

Service procedures - fuel system
21
Bleed the fuel system and test run the engine. See "Fuel
system, bleeding".
Injection pump, setting with
instrument 998 7057
(Injection angle)
Special tools: 999 3590, 998 7057
1
Remove the inspection cover on the camshaft at the back of
the cylinder block.
2
Remove the plug in the flywheel cover (16 mm hex socket
key) and fit rotating tool 999 3590 together with a ratchet.
Remove the inspection cover on the flywheel cover.
98
3
Crank the flywheel in the direction of rotation until 1st
cylinder is on compression, 0° on the flywheel and the
camshaft's marking hole pointing upwards.
4
Crank the flywheel back against the engine direction of
rotation about 1/4 turn.
Group 22