Volvo Penta TAD1360VE Operator's Manual
  1. Manuals
  2. Brands
  3. Volvo Penta Manuals
  4. Engine
  5. TAD1360VE
  6. Operator's manual
Volvo Penta TAD1360VE Operator's Manual

Volvo Penta TAD1360VE Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator's manual
13L
TAD1360VE, TAD1361VE, TAD1362VE, TAD1363VE, TAD1364VE, TAD1365VE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TAD1360VE and is the answer not in the manual?

Questions and answers

Related Manuals for Volvo Penta TAD1360VE

Summary of Contents for Volvo Penta TAD1360VE

  • Page 1 Operator’s manual TAD1360VE, TAD1361VE, TAD1362VE, TAD1363VE, TAD1364VE, TAD1365VE...
  • Page 2 WARNING! Operating, servicing and maintaining an engine can expose you chemi- cals including engine exhaust, carbon monoxide, phthalates, and lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. Breathing diesel engine exhaust exposes you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

  • Page 3: Table Of Contents

    Introduction ....................13 Fuel, oils and coolant ................14 Maintenance and replacement parts ............15 Excessive strain on a product and components ........15 Volvo Penta Dealer Network ..............18 Volvo Penta Action Service ..............18 Presentation ....................19 Engines ....................19 EMS (Engine Management System) ............
  • Page 4 Viscosity ....................83 Fuel System ................... 83 Cooling System ..................85 Coolant, Mixing ..................86 Water Quality ..................86 Inlet and Exhaust System ..............87 Electrical System .................. 87 Identification Numbers ................. 88 Index ......................91 47711155 06-2021 © AB VOLVO PENTA...

  • Page 5: Foreword

    Pay careful attention to the safety instructions included in the manual. As the owner of a Volvo Penta engine, you become part of a worldwide network of dealers and service workshop that assist you with technical advice, service requirements and replacement parts.

  • Page 6: Safety Information

    This chapter describes how safety precautions are If anything remains unclear or if you are unsure of presented in the manual and on the product. Read the something, contact your Volvo Penta dealer for chapter through very carefully before you start the assistance.
  • Page 7 WARNING! Ensure that all machine guards and safety devices are in place and are functional. P0024482 CAUTION! Never use tools or products that show signs of damage. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 8 Ensure that the workplace is well ventilated and take the necessary precautions before welding or grinding begins. Always ensure that there is a fire extinguisher close at hand in the work area. P0024470 47711155 06-2021 © AB VOLVO PENTA...
  • Page 9 Spare parts — safety WARNING! Always use spare parts with the same quality as genuine Volvo Penta parts to minimize the risk of an explosion or fire. Components in fuel systems and electrical systems on Volvo Penta engines are designed and manufactured to minimize the risk of explosions and fire, in accordance with applicable legal requirements.
  • Page 10 Prohibition on use of start spray WARNING! Never use start spray or similar agents to start an engine. This may cause an explosion in the inlet manifold. Risk of personal injury. P0024483 47711155 06-2021 © AB VOLVO PENTA...
  • Page 11 The alternator and electronics could be damaged. Avoid damage to the engine control module and other electronics IMPORTANT: Switch off the main switch before connecting or disconnecting a connector. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 12 Smoking is forbidden and the engine must be stopped. Proper fuel quality IMPORTANT: Always use the fuel recommended by Volvo Penta. See Technical Data in Operator’s Manual. Other fuel can damage the engine. Wrong fuel quality can also lead to higher service costs.
  • Page 13 Rinse immediately with copious amounts of water if the electrolyte gets in your eyes. Search directly after the rinsing help by medical staff. If it comes electrolyte to unprotected skin, wash immediately with soap and water. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 14 Cleanliness for sensitive components IMPORTANT: Observe meticulous cleanliness when handling system components. Even minimal amounts of dirt could cause a breakdown. Adjustment of the clutch CAUTION! Clutch adjustments must be carried out with the engine stopped. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 15: Introduction

    To retain the dependability and exhaust emission control originally built into all Volvo Penta engines, it is essential that the engines and receive periodic maintenance according to the maintenance instructions.

  • Page 16: Fuel, Oils And Coolant

    Make sure to always use suitable and correctly mixed coolant. If an unsuitable coolant has been used, or if the instructions for coolant mixture have not been followed, future warranty claims related to engine and accessories may be denied. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 17: Maintenance And Replacement Parts

    These qualities will be maintained through regular servicing and the use of spare parts with the same quality as genuine Volvo Penta parts. If reliable and purpose-built parts are not used, your safety, health, and the machine’s function may be compromised.
  • Page 18 Introduction Environmental care Environmental care is a core value at Volvo Penta. Energy efficiency and low emissions are among the most important product related aspects and priority focus areas for Volvo Penta business. Several of the global challenges the world faces are directly or indirectly related to power industries and transports.
  • Page 19 NOTICE! Neglects or failure to follow the points listed here may invalidate the engine emission certificate. This means AB Volvo Penta can no longer guarantee engine conformity with the certified model. Volvo Penta is not responsible for damages or costs arising as a result of this.

  • Page 20: Volvo Penta Dealer Network

    The Volvo Penta global network of authorized dealers is at your service. We strongly recommend that you take your product to an authorized Volvo Penta dealer for service and repair. They are specialists in Volvo Penta products and have the accessories, genuine...

  • Page 21: Presentation

    All of the engines are equipped with electronically controlled fuel management (EMS), turbocharger, charge air cooler, thermostatically controlled cooling systems and electronic speed control. The engines are fitted with SCR systems (Selective Catalytic Reduction) in order to reduce emissions. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 22: Ems (Engine Management System)

    EMS is an electronic system with CAN communication (Controller Area Network) for diesel engine control. The system has been developed by Volvo Penta and includes fuel regulation and diagnostic functions. The system consists of a control unit, injectors, a number of sensors that supply the control unit with information, and connectors for diagnostics and functional checks.

  • Page 23: Eats (Exhaust Aftertreatment System)

    Should the system detect deviations, the maximum engine torque and engine speed will be reduced and a fault code stored in the control unit. For further information refer to Fault handling, page 47. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 24 CAUTION! The EATS system needs time to for automatically drainage and depressurizing. Wait at least two minutes after the engine been turned off before removing the AdBlue/DEF hoses. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 25: Overview

    Presentation Overview The system comprises: 1 Tank 2 Pump 3 Injector 4 EATS Catalyst and Muffler 5 Catalytic Converter The atomized AdBlue®/DEF is sprayed into the exhaust gases upstream of the catalytic converter. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 26 85 C Boost tmp 59 C will increase as the injection valve is closed and no ° Oil Pres 480 kpa Oil Temp 87 C DEF/AdBlue level empty exhaust aftertreatment will take place. P0024267 47711155 06-2021 © AB VOLVO PENTA...
  • Page 27 25 °C (77 °F) or in direct sunlight. Remember that the solution expands upon freezing and to leave room for expansion in the tank when storing in spaces where there is a risk of freezing. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 28: Operation

    IMPORTANT: AdBlue®/DEF spillages may not be washed into drains. If a spill should occur, the solution must be absorbed using dry sand or other non-flammable material and handled according to local and national regulations. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 29 — flush with copious amounts of water and remove contaminated clothing. • eye contact — flush thoroughly for several minutes; contact physician as necessary. • inhalation — breathe fresh air and contact physician as necessary. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 30: Instruments And Controls

    NOTICE! Settings and what engine data that appears in the display may vary depending on installation and engine model. NOTICE! The menus and illustrations shown here are the English version. The language can be changed, however; refer to the Setup menu. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 31 Scroll downwards in menus SPEED - . Reduces engine rpm SEL. Selects in menus SPEED +. Increases engine rpm Scroll upwards in menus STOP. Stops the engine 10 ESC. Return to previous menu selection 47711155 06-2021 © AB VOLVO PENTA...
  • Page 32 Coolant temperature (°C) • Charge air temperature (°C) • Oil pressure (kPa) • Oil temperature (°C) • Engine hours (h) • Battery voltage (V) • Fuel consumption (l/h) • Instantaneous fuel consumption (trip fuel) (l) 47711155 06-2021 © AB VOLVO PENTA...
  • Page 33 The fault codes are shown as text on the display. • Scroll through the fault list with the arrow keys. Trip Data reset resets trip data, such as fuel consumption. • Press the SEL button to reset trip data 47711155 06-2021 © AB VOLVO PENTA...
  • Page 34 For activation, refer to Governor droop in the main menu. • Oil temp warning limit (°C) - setting alarm limit for oil temperature. • Coolant temp warning limit (°C) - setting alarm limit for coolant temperature. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 35 (accelerator). ext voltage input - engine rpm is controlled by an external unit. • Set idle voltage (V) - idle voltage level setting. • Set max voltage (V) - full throttle voltage level setting. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 36 DCU hardware Id - DCU part number. • DCU software Id - DCU software part number. • DCU dataset1 Id - DCU data set 1 part number. • DCU dataset2 Id - DCU data set 2 part number. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 37: Easy Link Instruments

    - Tachometer / hours counter (fault codes are also displayed on the tachometer display when the diagnostic button is pressed) - Coolant temperature - Oil pressure - Oil temperature - Battery voltage - Alarm panel - Turbo pressure 47711155 06-2021 © AB VOLVO PENTA...

  • Page 38: Starting

    Move the engine speed control to idle, and open the disengageable clutch/gearbox if installed. IMPORTANT: Never break the circuit with the main switch while the engine is running. Alternator and electronics could be damaged. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 39: Starting The Engine

    (7),press SEL-button (8) Never race the engine when it is cold. 4 In the pre-heater menu, press the SEL-button (8) to select pre-heating. 5 Press the START- button (2). 47711155 06-2021 © AB VOLVO PENTA...

  • Page 40: Starting Using Auxiliary Batteries

    Risk of arcing. Do not bend over any of the batteries either. 4 Remove the cables in the reverse order. IMPORTANT: The ordinary cables to the standard batteries must not under any circumstances be loosened. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 41: Operation

    The consequences can be carbon build-up on valves, piston crowns and the exhaust turbine, which could affect engine performance. Both conditions can lead to increased oil consumption and eventually external oil leakage from joints in the 47711155 06-2021 © AB VOLVO PENTA...
  • Page 42 • If visible slobber has occurred, it can be burned off by running the engine on at least 30% load for about 40-60 minutes. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 43: Engine Shutdown

    Depress the STOP-button (5). Auxiliary Stop For location of the extra stop, refer to Maintenance, page 55. WARNING! Working with or approaching a running engine is a safety risk. Watch out for rotating components and hot surfaces. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 44: After Engine Shutdown

    If there is a risk of freezing, the coolant in the cooling system must have adequate antifreeze protection. Refer to Maintenance, page 67. IMPORTANT: A poorly charged battery can freeze and burst. Refer to Battery, page 78. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 45: Fault Handling

    The operator is warned that there is a malfunction via the instruments. Depending on the instrumentation in use, the fault message is shown in various ways. Fault codes can also be read out by the Volvo Penta diagnostic tool. Depending on the severity of the fault, the diagnostic function will take various actions to protect the engine and limit emissions (e.g.

  • Page 46: Easy Link Instruments

    If so a new fault codes is registered. If a malfunction has not been corrected it will be registered once again and has to be acknowledged again. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 47: Eats Warnings And Inducements

    Fault handling, page 47. NOTICE! Warning messages and symbols may vary depending on the installation; shown here are those seen on panels sold by Volvo Penta. Warning Symbols Stimulus for power reduction warning. A fault has been detected in the EATS system.
  • Page 48 Joint alignments should be checked and gaskets replaced before reassembly. For cases with deposits larger in size – please contact your local Volvo Penta representative to discuss the issue. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 49: Quality Shortcomings And Component Defects

    • that the EGR valve is not stuck. If the fault can not be remedied with any of the above, refer to Fault handling, page 47. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 50: Eats Inducements

    8 If the fault has not been remedied following this, the engine will be limited to 20 % power after restart and service tools will be required to reset the system. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 51 5 Depending on the installation, it is possible after the first 20 hours to manually override the system actions and run the engine at full power for 3 x 30 minutes. After 30 minutes the engine drops to 20% power and must be restarted to begin the next 30-minute period. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 52: Inducements For Msha Applications (Mining Operations)

    5 A fault remains in the system memory for 40 hours; if a fault recurs within this period the engine will revert to the ramp-down point it was at when the fault was last remedied. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 53 4 A fault remains in the system memory for 40 hours; if a fault recurs within this period the engine will revert to the ramp-down point it was at when the fault was last remedied. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 54: Fault Code Register

    AdBlue®/DEF Hose Heater no.2 4355 3, 4, 5, 14 AdBlue®/DEF Hose Heater no.3 4356 3, 4, 5, 14 AdBlue®/DEF Hose Heater no.4 4357 3, 4, 5 Aftertreatment Reagent Pump Motor Speed 4374 0, 1, 10 47711155 06-2021 © AB VOLVO PENTA...
  • Page 55 Fault Code Register PPID PSID Aftertreatment Reagent Direction Valve 4376 3, 4, 5, 7 NOx monitoring failure 5246 0, 15, 16 Aftertreatment reagent Dosing system 5394 AdBlue®/DEF ECU main relay 520233 3, 4, 5, 6 47711155 06-2021 © AB VOLVO PENTA...

  • Page 56: Maintenance Schedule

    Maintenance Schedule Your Volvo Penta engine and its equipment are designed for high reliability and long life. The engines are built to have the smallest possible environmental impact. If given preventive maintenance, according to the maintenance schedule, these qualities will be retained and unnecessary malfunctions will be avoided. In order for the warranty to be valid, the owner must make sure that the services in the service intervals are performed.

  • Page 57: Maintenance

    4 Oil dipstick 5 Auxiliary Stop 6 Control Panel 7 Air Filter 8 Fuel Filter 9 Fuel pre-filter with water separator 10 Control Unit, EMS 11 Turbo 12 Starter motor 13 Oil filter 14 Coolant Filter 47711155 06-2021 © AB VOLVO PENTA...

  • Page 58: Engine, General

    Scrap the old filter. No cleaning or re-use is permissible • In continuous operation, the filter should be checked every 8 hours. For operations in extremely dirty environments such as coal mines and rock crushing mills, special air filters must be used. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 59: Charge Air Pipe, Leakage Check

    The alternator belts and drive belts have automatic belt tensioners and do not need to be adjusted. Check the condition of the drive belts. Replace as necessary; refer to Alternator Belt, Replace, page 59 and Drive Belt, Replace, page 58. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 60: Drive Belt, Replace

    8 Lift the 1/2" wrench and install the new drive belt. 9 Install the belt guards. 10 Install the fan guard and fan ring round the cooling fan. 11 Start the engine and perform a function check. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 61: Alternator Belt, Replace

    The oil change interval may under certain conditions be increased. To see if the engine complies Volvo Penta oil analysis needs to be performed. Contact your Volvo Penta dealer for further information. NOTICE! Oil change intervals must never exceed a period of 12 months.

  • Page 62: Oil Level, Checking And Topping Up

    • Only fill oil when the engine is stopped. • Only use Volvo Penta recommended oils; refer to Technical Data, page 82. • The oil level sensor only measures the oil level when the ignition is switched to on, not continuously during operation.

  • Page 63: Engine Oil, Replace

    Collect all the old oil and old filters, and hand them to a re-cycling station for destruction. 3 Remove the drain hose (or install the bottom drain plug). 4 Fill with engine oil. For change volume, please refer to Technical Data, page 82. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 64: Oil Filter/By-Pass Filter, Replace

    6 Top up with engine oil, start the engine and let it run for 20-30 seconds. 7 Stop the engine, check the oil level and top up as required. 8 Check the sealing round the oil filters. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 65: Fuel System

    1 Put a collection vessel under the fuel filter to collect the condensate and fuel. 2 Open the drain nipple (1) in the base of the fuel pre- filter. 3 Tighten the drain tap (1) when fuel without water starts to run out. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 66: Engine Fuel Filter Replacement

    6 If a water trap is installed, change the filter in it at the same time as the fuel filter, and clean the water trap in the plastic bowl under the filter with a soft rag. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 67: Fuel Pre-Filter, Replace

    Then tighten a further half turn, no more. 7 Connect the cable to the water trap sensor. 8 Where necessary, purge the fuel system; refer to Bleeding the Fuel System. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 68: Fuel System, Bleeding

    4 Lock the hand pump, push down and twist the handle. 5 Start the engine and allow it to idle fast for about 10 minutes. 6 Perform a leakage and function check. P0025497 47711155 06-2021 © AB VOLVO PENTA...

  • Page 69: Cooling System

    - in the worst case - can cause engine breakdown. Volvo Penta strongly recommend the use of our own coolants, ”Volvo Penta Coolant VCS Ready Mixed” or the concentrate ”Volvo Penta Coolant VCS”, which...

  • Page 70: Coolant Level, Checking And Topping Up

    Coolant filling must be performed with the engine stopped. Check the coolant level daily before starting. IMPORTANT: Only use coolant recommended by Volvo Penta. Top up with the same type of coolant as already used in the system. Different types of coolant must not be mixed.

  • Page 71: Coolant, Draining

    Do not use a high pressure power washer. Remove guards as necessary, to access the radiator. Clean with water and a mild detergent. Use a soft brush. Be careful not to damage the radiator vanes. Reinstall removed parts. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 72: Cooling System, Cleaning

    Mix in a separate clean vessel before filling the cooling system. Make sure that the liquids mix. IMPORTANT: Always follow local safety instructions and regulations. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 73 1 Empty the cooling system. Refer to Coolant, Draining, page 69. 2 Put a hose into the expansion tank filling hole and flush with clean water, as specified by Volvo Penta– refer to section Water quality in Technical Data, page 85 until the water draining out is completely clear.

  • Page 74: Inlet And Exhaust System

    AdBlue®/DEF has been added to the tank. IMPORTANT: The use of solution that do not fulfill the ISO 22241 standard will compromise the aftertreatment system performance, increase emissions. Any warranty claims will be rejected. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 75 Damage and costs arising from a failure to meet these requirements are not covered by Volvo Penta warranty obligations. ® If AdBlue /DEF is filled from a can or pump that lacks...

  • Page 76: Adblue/Def-Pump Filter, Change

    EATS system can take place. Switch off the engine. Disconnect the battery negative terminal. Remove the heater coil connector from the filter cover. NOTICE! Pull the connector straight out. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 77 Install filter and cover together into the pump. Tighten the filter cover using a torque wrench. NOTICE! Check that the drain valve is tightened. Reinstall the filter cover hose. Make sure that the connection locks securely. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 78 Start the engine and check that there are no leaks. Delete any fault codes; refer to Diagnostic Function. NOTICE! Take care of equipment and surplus urea solution and leave them at a re-cycling station for destruction. p0013223 47711155 06-2021 © AB VOLVO PENTA...

  • Page 79: Electrical System

    Always stop the engine and break the current using the main switches before working on the engine. IMPORTANT: Contact a Volvo Penta dealer for information if any arc welding will be performed on the application. Arc welding can cause damage to the engine and the electronics.

  • Page 80: Battery

    NOTICE! If low starter battery alarm occur, the battery may get drained which might result in loss of functions and engine stopping. 47711155 06-2021 © AB VOLVO PENTA...
  • Page 81 1 Connect the + cable (red) to the + pole on the battery and tighten the nut. 2 Connect the – cable (black) to the – pole on the battery and tighten the nut. NOTICE! Hand in the old battery to a re-cycling station. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 82: Storage

    It is of utmost importance that the conservation is performed correctly, therefore we have compiled a checklist covering the most important points. Before taking the engine out of service for long periods, Volvo Penta recommends that the engine is checked by a qualified workshop for possible need for overhaul or repair.
  • Page 83 2/3 diesel fuel. • Drain the conservation oil from the engine. • Bleed the fuel system. • Follow the other instructions on the previous page. * Conservation oils are sold by oil companies. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 84: Technical Data

    Full flow filter By-pass filter Lube oil pump Type Gear driven Oil recommendations Oil change interval, reached first in Engine Oil quality operation: TAD1360–65VE VDS-3 600 hours or 12 months VDS-2 VDS = Volvo Drain Specification 47711155 06-2021 © AB VOLVO PENTA...

  • Page 85: Viscosity

    Select the viscosity according to the table. The temperature values refer to stable ambient temperatures. NOTICE! Volvo Penta recommendation for lowest possible fuel consumption and optimal durability is to use SAE 10W-30 oil when the viscosity table allows. Fuel System...
  • Page 86 Sufficient fuel lubricity is essential to protect the fuel injection system against excessive wear. Restrictions for other diesel fuels Volvo Penta also approves the use of other diesel fuels as long as the here specified restrictions are followed. However Volvo Penta does not guarantee compliance with emission legislation or fulfillment of expected lifetime with these other diesel fuels.

  • Page 87: Cooling System

    20 liters (5.28 US gal) Volume (engine with standard radiator and hoses) Radiator, standard 44 liters (11.6 US gal) Radiator, HD (Heavy Duty) 58 liters (15.3 US gal) Thermostat 1 pc Opening temperature 82°C (180°F) 47711155 06-2021 © AB VOLVO PENTA...

  • Page 88: Coolant, Mixing

    Follow the mixing recommendation on the product. The coolant should be mixed with distilled, deionized water. For Volvo Penta specified water requirements; refer to Water Quality, page 86. NOTICE! Always use “Ready Mixed” coolant if water quality cannot be determined or if it does not fulfill ASTM D4985.

  • Page 89: Inlet And Exhaust System

    2 pcs. series connected 12 V, max. 220 Ah Battery electrolyte specific gravity at +25 °C: fully charged battery 1.28 g/cm (1.24 g/cm battery recharged at 1.20 g/cm (1.20 g/cm * Note. Applies to batteries with tropical acid. 47711155 06-2021 © AB VOLVO PENTA...

  • Page 90: Identification Numbers

    D Date of manufacture E Model year F – G – H Exhaust emisssion control system Example of Korea Approval label A Approval number B Engine model C – D – E Label part number P0030549 47711155 06-2021 © AB VOLVO PENTA...
  • Page 91 Technical Data Example of EU certificate label A Engine family B Date of manufacture C EU Type-approval number D Label part number 47711155 06-2021 © AB VOLVO PENTA...
  • Page 92 Applied standards: EN 61000–6–1:2007, EN 61000–6–2:2005, EN 61000–6–3:2007, EN 61000–6–4:2007, EN 12895:2015 + A1:2019, EN-ISO 14982:2009 and EN 13766-1:2018. For engines equipped with the Volvo Penta Start/Stop System the responsibility for the functional safety of the system lies with the machine manufacturer performing the integration.

  • Page 93: Index

    Fuel system, bleeding..........66 Fuel, oils and coolant..........14 Identification Numbers..........88 Inducements for MSHA applications (mining operations)..............50 Inlet and Exhaust System........72, 87 Lubrication System..........59, 82 Main switch..............77 Maintenance and replacement parts......15 Maneuvering..............39 47711155 06-2021 © AB VOLVO PENTA...
  • Page 95 ‫من الممكن طلب دليل المشغل بلغة أخرى مجا ن ً ا عبر اإلنترنت لفترة تصل إلى 21 شهر ً ا من بعد‬ .‫التسليم‬ /http:// manual.volvopenta.com/coupon .Volvo Penta ‫إذا كان الوصول إلى اإلنترنت غير متاح، فالرجاء االتصال بوكيل‬ © 2021 AB VOLVO PENTA Volvo reserves the right to make changes...
  • Page 96 AB Volvo Penta SE-405 08 Göteborg, Sweden www.volvopenta.com...

This manual is also suitable for:

Tad1361veTad1362veTad1363veTad1364veTad1365ve

Table of Contents