Unpacking The Autosampler; Damaged Packaging; Delivery Checklist - Agilent Technologies 1200 Series User Manual

3
Installing the G1330B Thermostat

Unpacking the Autosampler

Unpacking the Autosampler

Mechanical damage of the autosampler
C A U T I O N
If the transport assembly is not parked, the autosampler could be damaged due to
excessive shock of the shipping container during transport.
➔

Damaged Packaging

The two modules of the autosampler are shipped in separate boxes. Upon
receipt of your autosampler, inspect the shipping containers for any signs of
damage. If the containers or cushioning material are damaged, save them until
the contents have been checked for completeness and the autosampler has
been mechanically and electrically checked. If the shipping container or
cushioning material is damaged, notify the carrier and save the shipping
material for the carriers inspection.

Delivery Checklist

Unpack the two boxes of the autosampler. Ensure all parts and materials have
been delivered with the autosampler and the autosampler thermostat. The
delivery checklist are shown in
damaged parts to your local Agilent Technologies sales and service office.
If the thermostatted autosampler was ordered as an upgrade (G1395A) to an
existing autosampler, the shipment will also contain the required software
upgrades for your Agilent ChemStation.
20
Always park the transport assembly before shipment (see "Transporting the
Autosampler" in the corresponding manual).
Table 3 on page 21. Please report missing or
1200 Series AT User Manual