Setting Parameters - Softkey Settings - Aastra 480i CT Administration Manual

Setting Parameters – Softkey Settings
This section contains the softkey parameters that can be configured on the 480i CT
phone. There are eighteen softkeys that can be configured. These parameters can
be configured either from the Aastra.cfg or the <mac>.cfg file. Softkeys can be
configured as either speed dials or as additional call/line appearances.
Parameter –
softkeyN type
Description
Format
Default Value
Range
Example
Parameter –
softkeyN label
Description
Format
Default Value
Range
Example
Parameter –
softkeyN value
Description
Format
Default Value
Range
Example
Configurable through the configuration files only
The type of soft key that will be configured to.
Text
Not Applicable
line or speeddial. N in the softkeyN type ranges from 1 to 18
softkey1 type: line
softkey2 type: speeddial
Configurable through the configuration files only
The text label that should be displayed for the soft key.
If the soft key is of line type an icon appears beside the
soft key that indicates the status of the line that this soft
key is configured to.
Text
Not Applicable
Sequence of ascii characters. A width less than 11 char-
acters for line softkey type and a width less than 9 for
the speeddial softkey type is suggested. N in the soft-
keyN label ranges from 1 to 18
softkey1 label: "Line 9"
softkey2 label: "info"
Configurable through the configuration files only
If the soft key is of type, line then value should be the
line number that this soft key represents. If the softkey
is of type, speeddial then value should be the number
to speed dial.
Text
Not Applicable
line or speeddial. N in the softkeyN value ranges from 1 to18
softkey1 value: 9
softkey2 value: 411
Model / Administration Guide 16