Nfc Tap And Read The Configuration Data - Delta enteliZONE eZNT-Wi Series Application Manual

NFC Tap and Read the Configuration Data

Before configuring an enteliZONE product, ensure that NFC is enabled and that
sound volume is turned up on your NFC equipped phone or tablet.
This example shows the Net Builder app but a similar approach is used with the Stat
Configurator.
1) Move the NFC device over the front
of the target thermostat. The NFC
antenna is located at the bottom of
the front plate to the left of the Delta
Logo.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
2) Listen to the sound from your phone
or tablet as you move the NFC device
over the thermostat.
Page 93 of 126