Internal Ap Settings - Delta enteliZONE eZNT-Wi Series Application Manual

connectivity to the internet, you will see an external webpage which is not
what you need to configure a particular wireless thermostat.
The following figure shows the embedded webserver page for the device with
address 4109097. The other sections of the page are collapsed. You can click on a
section heading to expand or collapse it.

Internal AP Settings

The top of the webpage displays the Device Name, Device Address and the SSID
(router network name.) The AP Mode (Host Access Point) must be active to get this
webpage.
The default AP Mode password is DeltaControls. The password can be changed by
typing the new password in the password field of IPS2. As you click Save, you must
select "Commit Settings" from the Command choices on the Internet Protocol
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 35 of 126