Appendix: Entelizone Thermostat Setup Using An Android Nfc App - Delta enteliZONE eZNT-Wi Series Application Manual

Appendix: enteliZONE Thermostat Setup Using
an Android NFC App
You can use a phone or tablet equipped with NFC technology to configure an
enteliZONE thermostat in an efficient manner. Apple iOS is not supported. NFC Apps
are available that include support for enteliZONE Network sensor and thermostats.
If you have a passport login, see the enteliZONE page on the George Support site.
[link] https://support.deltacontrols.com/Products/SensorsThermostats
In most cases, the NFC Net Builder and/or Stat Configurator Android Apps provide
the most efficient approach to configure a large number of enteliZONE stats. These
NFC apps can change the stored configuration values in an enteliZONE thermostat
including a unit that is in an unopened individual shipping box. The settings can be
applied to an enteliZONE thermostat with or without power connected.
Delta Controls provides two apps that help to configure an enteliZONE thermostat.
Both these apps have Preview demo screens. See the
this section.
Net Builder: This app focuses on setting the network settings for the USB and
l
NET1 ports, MS/TP, device BACnet/Mac address and Baudrate. For eZNT-Wi/
eZNTW, Net Builder handles DHCP only and you need to use the eZNT-Wi/
eZNTW configuration webpage or enteliWEB to set up a static IP address. If
you uncheck the DHCP checkbox, you can use the configuration webpage to
set a static IP address.
Stat Configurator: eZNx specific options are set through this NFC Stat
l
Configurator App. The Stat Configurator sets the button arrow configuration,
Decimal Type, motion sensitivity, and beeper on the product.
In addition, the Chameleon App provides means to demonstrate the range of
backlight colors and the Virtual Stat App provides means for an occupant to control
their space.
The Mobile Apps are available
https://support.deltacontrols.com/Support/Downloads/MobileAppsDownload
An enteliZONE thermostat requires Net Builder v3.20.005+ or Stat Configurator
v2.10.003+ which are both backward compatible with the eZNS, eZNT, eZNT-Wi,
and eZNTW/ eZNTW-Wi products.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
here and require a Delta Passport login.
App Preview Mode content in
Page 91 of 126