Delta enteliZONE eZNT-Wi Series Application Manual page 110

Appendix: enteliZONE Thermostat USB Service Port
view the other devices in the network. To install a virtual COM driver, see the
Virtual COM Port with Delta eZNx Driver
enteliWEB does not require the ForceSubscribeNetwork registry key to see the
network.
Support for the eZNT is included in the enteliWEB 4.14 Beta build and support for the
eZNS is expected with the 4.14 release build.
With enteliWEB 4.14, the dropdown filter for the MS/TP connection in the Add
Connection dialog now includes eZNS/eZNT devices. You no longer have to use the
enteliWEB Device Manager or ORCAview to find the COM port number and then
manually type it into the COM Port field (e.g. COM5). With ORCAview, you can find
the available Virtual Comm ports using the ORCAview OWS Logon dialog via the
Advanced – Connect Using dropdown option Serial: BACnet MS/TP.
Add Connection procedure for wired MS/TP through a virtual COM port
The Virtual Com Port (COM7 in this example) can be selected as a COM Port through
the enteliWEB Add Connection dialog.
1. If required, install a virtual COM driver. You can install the Delta eZNx driver or
use the Microsoft driver included with Windows 10. You need to Connect the
USB port before launching enteliWEB site configuration. See the
Virtual COM Port
2. Click > Sites.
3. On the same row as the site name on the far right side, click
Connection. The Add Connection dialog opens.
4. From the Type list, select MS/TP.
5. Select the COM Port name for the connection. For this example, select the
COM7 eZNx Virtual Com Port (COM7). If the eZNx COM Port is not listed,
refresh the page or log out and log back into enteliWEB. The eZNx COM port
should display in the dropdown list.
Page 110 of 126
topic.
section.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Create
Set Up a
Add
Edition 1.4