A: Configuration Webpage Via Host Access Point (Ap) Mode (Ips2) - Delta enteliZONE eZNT-Wi Series Application Manual

Workflow: Do Wi-Fi Setup

A: Configuration Webpage via Host Access Point (AP) Mode (IPS2)

Host Access Point (AP) mode provides a temporary connection to do initial setup
and troubleshooting. Host Access Point (AP) mode is off when the eZNT-Wi/eZNTW-
Wi stat is in normal operation. Station mode is used for normal operation and AP
mode automatically turns off after 30 minutes with no AP activity.
With the Configuration webpage, you can connect to an eZNT-Wi/eZNTW-
Wi directly via AP mode. However, enteliWEB does not work in AP mode as
this mode does not support BACnet over IP.
Page 42 of 126 eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4