Overview: Wi-Fi - Delta enteliZONE eZNT-Wi Series Application Manual

Overview: Wi-Fi Concepts, Passwords and Modes
Comment: Webserver configuration is controlled with a username/password. The User-
name and Password for access are from SUA2. Both the Username and Password are
changeable. After making changes to SUA2, reset the eZNT-Wi/ eZNTW for the changes
to take effect. When you load a database, the Username and Password in SUA2 are used.
If the SSID of your router is not broadcasted, then you need to type it in. If you want to
access the page by entering "ezntw.deltacontrols.com" then make sure your computer
does not have internet access. If your computer has connectivity to internet, you will be
directed to an incorrect external webpage. If USB is disabled, the device also disables
the webserver.
Net Builder App
Stat Configurator
Comment: This password is the same as the onscreen password and can be edited. The
NFC password is contained in AV531. This password is restricted to 1 and 0 values.
Station Mode IPS1
Comment: Password for router Beware that the IPS1 Password field does not have a
double entry confirmation. If you make a mistake in typing in the password, you will not
be able to log in anymore.
Your Wireless
Router(s)
Comment: You need to track and record the Router Name (SSID) and the password for
each router. The Net Builder App lets you enter the router password. However, Net
Builder does not read the password from NFC.

Overview: Wi-Fi

This section applies only to models that have Wi-Fi capability.
Page 18 of 126
Not apply
Delta Setup
Your Router SSID
Name is editable
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
1011 same as
eZNT-Wi/ eZNTW
On-Screen Con-
figuration Menu
DeltaControls
Your Router pass-
word is editable
No, not in an App, but
you can change at
object level in
enteliWEB.
The eZNT-Wi/ eZNTW-
Wi is shipped with a
default SSID name
and a password but
you can change both
of these.
SSID:
Delta Setup
Password:
DeltaControls
Edition 1.4