Use Orcaview With Usb Service Port - Delta enteliZONE eZNT-Wi Series Application Manual

6. Enter the MAC Address for the connection. The default value of 127 is usually
okay. It is suggested to stay with the range of 100-127 to avoid conflicts with
any existing networks that are in the 0-99 range.
7. Click Add.
A check mark status indicator
Server is connected to the network, otherwise
the enteliWEB BACnet Server was unable to create the connection.
8. Refresh the enteliWEB page.

Use ORCAview with USB Service Port

The ORCAview OWS provides access to the objects in an enteliZONE thermostat
and also the other devices in the network using a connection to the micro USB
Service Port.
For an enteliZONE thermostat with derived Network Addressing (DNA) set to off on
the network, you need to add a ForceSubscribeNetwork registry key to see the
other devices on the network using the ORCAview OWS. See the
for Wi-FI and Network without DNA
The Virtual Com Port (COM4 in this example) can be selected as a COM Port through
the OWS Logon dialog via the Advanced – Connect Using dropdown option Serial:
BACnet MS/TP.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
is displayed when the enteliWEB BACnet
content.
is displayed to indicate that
Add Registry Key
Page 111 of 126