Access Config Webpage Via Host Access Point (Ap) Mode - Delta enteliZONE eZNT-Wi Series Application Manual

Workflow: Do Wi-Fi Setup
This page is available through both AP mode and Station Mode.
The enteliWEB Wi-Fi Configuration webpage has the following sections:
a. Device Name and Device Address
b. Internal AP Settings
c. Wi-Fi Settings
d. BACnet Network Setting
e. Device Info
Click on a section heading to collapse or expand it.
When you make any changes to the fields on this webpage, you need to
click Save in the upper right area of the page. Otherwise, your changes will be lost.

Access Config Webpage via Host Access Point (AP) Mode.

AP mode is for initial setup and troubleshooting. The AP mode automatically turns off
after 30 minutes with no AP activity. AP mode must be off during normal operations.
You must connect through AP Mode and not through any other internet connection.
The default AP Mode password is DeltaControls. Ensure that your computer does not
have any other network connectivity to the internet. In a browser, type:
http://192.168.124.1
Or:
http://ezntw.deltacontrols.com
You need to connect with the embedded web page included in each wireless
thermostat. Make sure your computer does not have internet access
through an unintended wired or wireless connection. If your computer has
Page 34 of 126 eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4