Enteliweb Configuration Webpage - Delta enteliZONE eZNT-Wi Series Application Manual

The following figure shows the AP Host mode (IPS2) for the IP and Description tab.
Connect Using Station Client Mode: (normal connection after initial setup)
• Connect your web browser to the IP address of the eZNT-Wi/ eZNTW-Wi (IPS1).
This IP is only known if the initial setup using AP Mode is already completed. In AP
mode, the MAC address ends in 447F. Station Client mode (IPS1) is used for normal
operation and has a MAC address that ends with 447E which is one less than the
MAC used for AP Host mode.

enteliWEB Configuration Webpage

The eZNT-Wi/eZNTW-Wi has a built-in webserver that provides a configuration
webpage.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 33 of 126