Database Objects; Table Of Supported Objects - Delta enteliZONE eZNT-Wi Series Application Manual

Database Objects

Database Objects
With the eZNT/eZNT-Wi/eZNTW, the objects are located on the physical controller.
The eZNS depends on a system controller to act as a parent device. This section
provides information needed to use objects on the thermostats. The products offer
possibilities to add dynamic objects, algorithms and expanded LCD object features.

Table of Supported Objects

Some objects are static ones that pre-exist in the default database and cannot be
deleted or created. Dynamic objects can be created or deleted.
The following table lists the static and dynamic object types available and specifies
the number of instances.
Dynamic
Object
Create/Delete
Type
AI, BI, Yes
AO, BO
AV, BV,
Yes
MV
AIC No
AOC No
BDC No
MIC No
CO No
PG No
TL No
MT Yes
EV No
EVC Yes
SCH No
Page 62 of 126
Number of Object
Instances
For Linknet object instances,
see the Linknet Setup for
eZNT-Wi and eZNTW-Wi topic
near the end of the
Do Wi-Fi Setup section.
95 (default) and create up to
216
16
6
5
36
5
6 (5k each)
23
3
5 + 5 intrinsic (eZNT)
6 + 3 intrinsic (eZNT-Wi/
eZNTW)
3
1
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Workflow:
Edition 1.4