Delta enteliZONE eZNT-Wi Series Application Manual page 59

Menu
Item
Options
Delta
LCD
Font
oFF
rOU
CON
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Default Description
Indicates eZNT-Wi/ eZNTW router
connection state is either: CON or oFF. A
connection is indicated by CON. This is Client
Station mode and is the typical operation
mode for the unit after initial setup.
The router menu item also indicates the Wi-
FI signal strength (AV94) by displaying 0
(very weak) to 5 (very strong) curved bars.
It is recommended to have a signal strength
of at least -70 dB (2 bars). If the Station Wi-
Fi is not connected (Off), no bars are
displayed. When the unit is in the process of
connecting, it shows a value of oFF.
The following scale is used for the number of
bars for a given Wi-Fi signal strength:
5 (>= -35dB) Strong signal that should
eliminate any signal strength issues.
4 (-35 to -50) Strong signal
3 (-50 to -60) Normal signal.
2 (-60 to -70) Satisfactory signal but may
experience occasional drop off to offline.
1 (-70 to -85) Weak signal with more
chances of communication issues and device
offline concurrences. Database Save/ Load
and firmware flashing may experience
failures.
0 (<-85) no signal.
Page 59 of 126