Delta enteliZONE eZNT-Wi Series Application Manual page 69

Object Mapping
Backlight Color
AV529
0 = use RGB value from R = AV526, G = AV525, B =
AV524.
1 = WHITE (255, 255, 255)
2 = RED (255, 0, 0)
3 = GREEN (0, 255, 0)
4 = BLUE (0, 0, 255)
5 = YELLOW (255, 255, 0)
6 = MAGENTA (255, 0, 255)
7 = CYAN (0, 255, 255) 8 = LIGHT BLUE (0, 128, 255)
9 = GREEN BLUE (0, 255, 128)
10 = LIGHT GREEN (128, 255, 0)
11 = ORANGE (255, 128, 0)
12 = FUCHSIA (255, 0 128)
13 = VIOLET (128, 0, 255)
>= 14 is WHITE
Auto-Backlight
AV530
0 = disable: Uses LCD0.Backlight to set backlight
according to either AV528 On Brightness or AV527 Off
Brightness.
x > 0 = After a button/slider press, backlight is set to
AV528 On Brightness for x seconds, and then reverts back
to AV527 Off Brightness. The LCD0.Backlight property is
ignored.
See the Backlight Operation section.
AV531 PIN for configuration menu and NFC Apps. Using 0's and
1's, there are 16 combinations: from 0000 to 1111. If any
digits are not a 0 or 1, access to the configuration menu
will not be possible.
eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
R/W
R/W
R/W
R/W
Page 69 of 126