B: Enteliweb Configuration Webpage Via Station Mode (Ips1) - Delta enteliZONE eZNT-Wi Series Application Manual

Workflow: Do Wi-Fi Setup
For an eZNTW-Wi, the SSID is composed of: "eZNTW-" and the last 4 digit of the AP
mode Mac Hex Address. For example, the router network name (SSID) might be:
eZNTW-A3A9
The last 4 digit of the SSID (e.g. 447E or A3A9) briefly display at power up and can
be viewed in the on screen Display Configuration Menu. The full SSID is also
displayed on the eZNT-Wi/ eZNTW Configuration webpage and enteliWEB device
object page
The default Password is: DeltaControls
To change the password for the SSID:
1. In the enteliWEB eZNT-Wi/eZNTW configuration page, type the new password
in the Password field.
2. Click Save.
3. In the Command field, select Commit Settings.
4. Click Save.
This password can also be changed in the eZNT-Wi/ eZNTW Configuration webpage.

B: enteliWEB Configuration Webpage via Station Mode (IPS1)

In Station (Client) Mode, both enteliWEB and the Configuration Webpage work. In
(Host) AP mode, only the Configuration Webpage works as enteliWEB requires
BACnet over IP which (Host) AP mode does not support.
This Wi-Fi Configuration page shows the IP Address of an eZNT-Wi/eZNTW-Wi
device in the network. You need to know the IP address of the eZNT-Wi/ eZNTW-Wi
device to access this page. You can find this out from the connected device table of
your router.
The enteliWEB Configuration webpage is protected by a username and password
which are factory set but both can be changed.
The default login for the enteliWEB webpage is:
Username: ADMIN
l
Password: ADMIN
l
The following router settings are available on IPS 1 – Station Mode:
SSID – Allows you to scan all available router/SSID within range. When an
l
SSID is selected from the dropdown list, the eZNT-Wi/ eZNTW-Wi attempts to
connect with a network. The SSID is composed of: "eZNTW-" and the last 4
digit of the AP mode Mac Hex Address.
Page 44 of 126 eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4