Starting The Ups In Normal Mode - Huawei UPS2000-A-RTL Series User Manual

UPS2000-A-(6 kVA-10 kVA)-RTL
User Manual
Table 4-5 Description of working mode icons

4.5.1 Starting the UPS in Normal Mode

After the UPS is powered on, the LCD screen lights up for 1 second, and then initialization
starts.
After the progress bar is complete, the default screen is displayed, as shown in
Figure 4-3 Power-on and default screen
Press
is displayed. After the UPS starts successfully, it enters normal mode, as shown in
Issue 07 (2020-01-10)
Symbol Meaning
Mains input
Rectifier/PFC working
Battery mode
Battery charging
Battery hibernation
Inverter mode
Bypass mode
Load
Energy-saving mode
for 5 seconds. Release the button when you hear a beep sound. The startup screen
Copyright © Huawei Technologies Co., Ltd.
4 Control Panel
Figure 4-3.
Figure 4-4.
42