Starting The Ups In Battery Mode; Lcd Menu Hierarchy - Huawei UPS2000-A-RTL Series User Manual

UPS2000-A-(6 kVA-10 kVA)-RTL
User Manual
Figure 4-4 Normal mode

4.5.2 Starting the UPS in Battery Mode

After the UPS is powered on, press
lights up for 1 second, initialization starts. After the initialization progress is complete, the
default screen is displayed, as shown in
Figure 4-5 Power-on and default screen
Press
is displayed. After the UPS starts successfully, it enters battery mode, as shown in
Figure 4-6 Battery mode

4.6 LCD Menu Hierarchy

Letter and LCD display mapping
Table 4-6
Issue 07 (2020-01-10)
for 5 seconds. Release the button when you hear a beep sound. The startup screen
lists the mapping between letters and the LCD display.
Copyright © Huawei Technologies Co., Ltd.
. Then, the LCD screen lights up. After the screen
Figure 4-5.
4 Control Panel
Figure 4-6.
43