Port Setting; Port Control - ORiNG RGS-R9004GP+ME-HV User Manual

Unknown
Rx and Tx Lease
Active
Rx Discarded
checksum error
Rx Discarded from
Untrusted

5.3 Port Setting

Port Setting allows you to manage individual ports of the switch, including traffic, power, and
trunks.
5.3.1

Port Control

This page shows current port configurations. Ports can also be configured here.
Label
Port
Description
Link
Current Link Speed
Configured Link Speed
ORing Industrial Networking Corp
received and transmitted.
The number of lease active (option 53 with value 13) packets
received and transmitted.
The number of discard packet that IP/UDP checksum is error.
The number of discarded packet that are coming from untrusted
port.
Description
This is the logical port number for this row.
The description of the port. It is an ASCII string no
longer than 256 characters.
The current link state is displayed graphically. Green
indicates the link is up and red that it is down.
Provides the current link speed of the port.
Selects any available link speed for the given switch
port. Only speeds supported by the specific port are
shown. Possible speeds are:
Disabled - Disables the switch port operation.
Auto - Port auto negotiating speed with the link
partner and selects the highest speed that is
compatible with the link partner.
RGS-R9004GP+ME User Manual
83