Snmp; Snmp System Configurations - ORiNG RGS-R9004GP+ME-HV User Manual

Port Config
This page allows you to enable or disable a port for GVRP operation. This configuration can be
performed either before or after GVRP is configured globally - the protocol operation will be the
same.
Label
Port
Mode

5.5 SNMP

5.5.1

SNMP System Configurations

ORing Industrial Networking Corp
supported by GVRP is specified. By default this number is
20. This number can only be changed when GVRP is turned
off.
Description
The logical port that is to be configured.
Mode can be either 'Disabled' or 'GVRP enabled'. These values turn the
GVRP feature off or on respectively for the port in question.
RGS-R9004GP+ME User Manual
102