Ip Source Guard - ORiNG RGS-R9004GP+ME-HV User Manual

HTTP/HTTPS
SNMP
TELNET/SSH
Statistics
This page provides an overview of access management configurations.
5.8.3

IP Source Guard

IP source guard can prevent traffic attacks if a host tries to use the IP address of its neighbor.
You can enable IP source guard when DHCP snooping is enabled on an untrusted interface.
With this function enabled, the switch blocks all IP traffic received on the interface except for
DHCP packets allowed by DHCP snooping.
Configuration
ORing Industrial Networking Corp
The host can access the switch from HTTP/HTTPS interface if the
host IP address matches the IP address range provided in the entry.
The host can access the switch from SNMP interface if the host IP
address matches the IP address range provided in the entry.
The host can access the switch from TELNET/SSH interface if the
host IP address matches the IP address range provided in the entry.
RGS-R9004GP+ME User Manual
157