Qos Egress Port Scheduler And Shapers - ORiNG RGS-R9004GP+ME-HV User Manual

Label
Port
Enable(E)
Rate
Unit

5.6.7 QoS Egress Port Scheduler and Shapers

This page allows you to configure Scheduler and Shapers for a specific port.
Strict Priority
ORing Industrial Networking Corp
Description
The port number for which the configuration below applies.
Check to enable queue policer for individual switch ports
Configures the rate of each queue policer. The default value is 500.
This value is restricted to 100 to 1000000 when the Unit is kbps,
and is restricted to 1 to 3300 when the Unit is Mbps.
This field is only shown if at least one of the queue policers is
enabled.
Configures the unit of measurement for each queue policer rate as
kbps or Mbps. The default value is kbps.
This field is only shown if at least one of the queue policers is
enabled.
RGS-R9004GP+ME User Manual
123