Dscp-Based Qos - ORiNG RGS-R9004GP+ME-HV User Manual

Label
Port
Mode
Qn

5.6.10 DSCP-Based QoS

This page allows you to configure basic QoS DSCP-based QoS Ingress Classification settings
for all switches.
Label
DSCP
Trust
QoS Class
DPL
ORing Industrial Networking Corp
Description
The switch port number to which the following settings will be
applied. Click on the port number to configure the shapers
Shows disabled or actual queue shaper rate - e.g. "800 Mbps"
Shows disabled or actual port shaper rate - e.g. "800 Mbps"
Description
Maximum number of supported DSCP values is 64
Check to trust a specific DSCP value. Only frames with trusted
DSCP values are mapped to a specific QoS class and drop
precedence level. Frames with untrusted DSCP values are
treated as a non-IP frame.
QoS class value can be any number from 0-7.
Drop Precedence Level (0-1)
RGS-R9004GP+ME User Manual
127