Mvr - ORiNG RGS-R9004GP+ME-HV User Manual

Label
VLAN ID
Groups
Port
Mode
Source Address
Type
Hardware Filter /
Switch
Port Group Filtering
Label
Port
Filtering Profile
Profile
Management
Button

5.7.3 MVR

This page provides MVR related configurations.The MVR feature enables multicast traffic
forwarding on the Multicast VLANs.
In a multicast television application, a PC or a network television or a set-top box can receive
ORing Industrial Networking Corp
Description
The VLAN ID of the group
The group address of the group displayed
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number,
Group Address) basis. It can be either Include or Exclude.
IP Address of the source.
Currently, the maximum number of IPv6 source address for filtering
(per group) is 8.
When there is no any source filtering address, the text "None" is
shown in the Source Address field.
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address
from the source IPv6 address could be handled by chip or not.
Description
The logical port for the settings.
Select the IPMC Profile as the filtering condition for the specific port.
Summary about the designated profile will be shown by clicking the
view button.
You can inspect the rules of the designated profile by using the
following button:
: List the rules associated with the designated profile.
RGS-R9004GP+ME User Manual
146