Ssh; Lldp - ORiNG RGS-R9004GP+ME-HV User Manual

5.1.10 SSH

You can configure the SSH mode in this page.
Label
Mode
Save
Reset

5.1.11 LLDP

LLDP Configurations
This page allows you to examine and configure current LLDP port settings.
Label
Tx Interval
Tx Hold
Tx Delay
ORing Industrial Networking Corp
Description
Enable or disable SSH.
Click to save changes
Click to undo any changes made locally and revert to previously
saved values.
Description
The switch periodically transmits LLDP frames to its neighbors to
update the network discovery information. The interval between
each LLDP frame is determined by the Tx Interval value which
must be between 5 - 32768 seconds.
Each LLDP frame contains information about how long time the
information in the LLDP frame shall be considered valid.
The LLDP information valid period is set to Tx Hold multiplied
by Tx Interval seconds. Valid values must be between 2 - 10
times.
When a setting is changed (e.g. the IP address), a new LLDP
RGS-R9004GP+ME User Manual
52