Wred - ORiNG RGS-R9004GP+ME-HV User Manual

Port
Action
Conflict

5.6.16 WRED

This page allows you to configure the Random Early Detection (RED) settings.
Through different RED configuration for the queues (QoS classes) it is possible to obtain
Weighted Random Early Detection (WRED) operation between queues.
The settings are global for all ports in the switch.
ORing Industrial Networking Corp
SNAP: Only (SNAP) frames are allowed.
IPv4: the QCE will match only IPV4 frames.
IPv6: the QCE will match only IPV6 frames.
Indicates the list of ports configured with the QCE.
Indicates the classification action taken on ingress frame if
parameters configured are matched with the frame's content.
There are three action fields: Class, DPL, and DSCP.
Class: Classified QoS; if a frame matches the QCE, it will be put in
the queue.
DPL: Drop Precedence Level; if a frame matches the QCE, then DP
level will set to a value displayed under DPL column.
DSCP: if a frame matches the QCE, then DSCP will be classified with
the value displayed under DSCP column.
Displays the conflict status of QCL entries. As hardware resources
are shared by multiple applications, resources required to add a QCE
may not be available. In that case, it shows conflict status as Yes,
otherwise it is always No. Please note that conflict can be resolved
by releasing the hardware resources required to add the QCL entry
by pressing Resolve Conflict button.
RGS-R9004GP+ME User Manual
133