Operation - ClipperCreek HCS User Manual

HCS User Manual

OPERATION

The HCS EVSE is a compact wall or pedestal-mounted EVSE
that provides the Plug-in Hybrid or Battery Electric Vehicle
(together Plug-In Electric Vehicles, or "PEV") user with a safe
and manageable link between the power grid and the PEV. Both
hardwired HCS and plug-in HCS versions are available.
Simply unwrap the SAE J1772 charge cable and plug the connector
firmly into the vehicle's charge port.
Normally, the vehicle will immediately request a charge using a
special communication line in the cable. Within a few seconds the
Green "Charging" light on the face of the HCS will turn on and the
charging cycle will begin. After an average driving day the vehicle
battery pack will require several hours to recharge completely.
Charging overnight is the most convenient way to maintain healthy
batteries and ensure the vehicle's full range will be available for
the next day.
When the vehicle has stopped charging the Green "Charging" light
on the HCS will turn off. To remove the connector head once a
charge cycle has completed (or to interrupt a charge in progress)
press and hold down the latch release lever on the connector handle
then unplug the connector from the vehicle charge port.
15