Using The Padlock; Charge Connector Secured With Padlock Which Cannot Be Removed - ClipperCreek HCS User Manual

USING THE PADLOCK

A padlock with three keys is included with ClipperCreek EVSE
when the connector style includes a lock hole. This rust-proof,
solid brass padlock is provided to secure the charge connector to
prevent the vehicle's charge from being interrupted via removal.
Figure 11: Locking the SAE J1772 Connector with Padlock
Included
Figure 12: Charge Connector Secured with Padlock which
Cannot be Removed from Vehicle without Key
NOTE: This padlock
can also be used in
combination with the
provided connector holster
as a low cost access
control solution. Refer to
Figure 13.
Insert Padlock into opening at the top of the
SAE J1772 Connector then close to secure.
Figure 13: Padlock Used in
Combination with Connector
Holster After Charging
35
HCS User Manual