Table of Contents
Advertisement
EV40 Manual
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
This product has been designed to protect against Radio Frequency Interference (RFI).
However there are some instances where high powered radio signals or nearby RF-
producing equipment (such as digital phones, RF communications equipment, etc.)
could affect operation.
If interference to your charge station is suspected, we suggest the following steps be
taken before consulting your Sun Country Highway Sales and Service Representative
for assistance:
1. Reorient or relocate nearby electrical appliances or equipment during
charging.
2. Turn off nearby electrical appliances or equipment during charging.
CAUTION: Changes or modifications to this product by other than an
authorized service facility may void FCC compliance.
ATTENTION: Modifications apportées à ce produit par qui conque autre qu'un
centre de service autorisé peut annuler la conformité FCC.
OPERATION
The EV Electric Vehicle Charging Station is a compact wall or pedestal-mount- ed
charging station that provides the Plug-in Hybrid or Battery Electric Vehicle (together
Plug-In Electric Vehicles, or "PEV") user with a safe and manageable link between the
power grid and the PEV. Both hardwired (EV) and NEMA plug-equipped (EV-40P)
versions are available.
The EV is very easy to use. Just unwrap the SAE-J1772
charge coupler firmly into the vehicle's charge port.
Normally, the vehicle will immediately request a charge using a special commu-
nication line in the cable. Within a few seconds the green "Charging" light on the face
of the EV will turn on and the charging cycle will begin. After an aver- age driving day
the vehicle battery pack will require several hours to recharge completely. Charging
overnight is the most convenient way to maintain healthy batteries and ensure the
vehicle's full range will be available for the next day.
When the vehicle has stopped charging the green "Charging" light on the EV will turn
off. To remove the charge coupler once a charge cycle has completed (or to interrupt a
charge in progress) press and hold down the latch release lever on the charge coupler
handle then unplug the charge coupler from the vehicle charge port.
tm
charge cable and plug the
Page ! 8
Advertisement
Table of Contents
