Charge Cable Wrap Guidelines; Drape The Charge Cable Loosely Around The Hcs Enclosure - ClipperCreek HCS User Manual

HCS User Manual

CHARGE CABLE WRAP GUIDELINES

The HCS enclosure body is sculpted to allow the charge cable to
be wrapped around it for convenient storage as well as to keep
the bulk of the cable off of the ground and out of the way. As the
charge cable is comprised of a number of wires, coiling the charge
cable too tightly around the HCS enclosure will result in the charge
cable feeling warmer to the touch than would ordinarily be the
case.
To minimize this effect, it is recommended that the charge cable
be loosely draped around the HCS enclosure body with larger
loops. This will also permit greater convenience in "pulling off"
additional loops if a longer charge cable reach is desired.
Figure 8: Drape the Charge Cable Loosely Around the HCS
Enclosure
30