Check Input Settings - Martin Audio MLA User Manual

MLA System
USER GUIDE
All being well you will see a confirmation message of a successful upload;-
You can close the Preset Loader window, the system is now ready to use.

Check Input Settings

There is just one final check to be made if your system has been switched to receive input from AES3 instead of the default of
Analogue. When one of the factory PEQ's is loaded during the Preset Loading process, the inputs of all cabinets in the array are
changed to match the first cabinet. This does not happen when a custom PEQ is loaded or if 'Load in Background' is selected. If
therefore your array is using AES3 left or right for its input, the replacement module will still be set to Analogue. To rectify this,
open the Array in Vu-Net by double clicking on it. You will see the array configuration in its own tab;-
MLA System User Guide V2.1
375