Martin Audio MLA User Manual page 371

MLA System
USER GUIDE
The first stage is to load the D2P file created for the project using Display 2.1. Click on the 'Select D2P File' button and navigate
to the file location.
There are a couple of outcomes once the file has been loaded. If there is only one optimisation and all arrays are the same size
the files will automatically be loaded into the arrays, the greyed out "Assigned D2.1 Presets" boxes will appear bright green
showing that a Preset is assigned ready to be synchronised;-
As we may not want to disturb the arrays that are working perfectly well we may want to just upload the optimisation to the
new array with the module we have replaced. In this case drag the optimised file out of the array back to the "Available D2.1
presets" position and you will have the following;-
MLA System User Guide V2.1
371