Manually Configuring The Wireless Access Point (Wap); Specification; Processor; Operating System - Martin Audio MLA User Manual

MLA System

Manually Configuring the Wireless Access Point (WAP)

1. Connect your computer and the Picostation that will be the Wireless Access Point (WAP) to the switch
2. Load the Ubiquiti Discovery tool, scan for the connected Picostation. Once found, double click on the Picostation, select
the IP address which isn't 192.168.1.20 and click the Web UI button
3. The logon screen is then displayed in your web browser. Login using the following credentials:
Username – ubnt
Password – ubnt
4. Click on the Wireless tab and enter the following information:
Wireless Mode
SSID
Country Code
Security
WEP Key
5. Click on the Network tab and enter the following information:
IP Address
Netmask
Gateway IP
Primary DNS IP
6. Click on the Change button at the bottom of the screen
7. Disconnect the WAP and the computer from the switch, wait 10 seconds for your computer to lose its network
connection, and then reconnect both
8. Load the Ubiquiti Discovery tool, scan for the connected Picostation. Once found, double click on the Picostation, select
the IP address which should now be 10.10.10.2 and click the Web UI button
9. The logon screen is then displayed in your web browser. Login using the following credentials:
Username – ubnt
Password – ubnt
10. Click on the System tab and enter the following information:
Device Name
Administrator Username
Current Password
New Password
Verify New Password
11. Click the change button
The Wireless Access Point (WAP) has now been configured; they can be re-configured using the files installed on the tablet PC

Specification

Please note that as with most computer systems, specifications change extremely frequently so please contact Martin Audio if
you have any questions regarding the latest specification for production systems.

Processor

Intel® Core™ i7-2640M 2.9 GHz, 4MB L3, 1600Hz FSB

Operating System

MLA System User Guide V2.1
USER GUIDE
= Access Point
= MLA System
= United Kingdom
= WEP
= Enter a 10 digit hexadecimal combination
= 10.10.10.2
= 255.255.255.0
= 10.10.10.1
= 10.10.10.1
= MLA WAP
= admin
= ubnt
= [Enter the same password used for the DHCP server]
= [Enter the same password used for the DHCP server]
108