MLA System
USER GUIDE
Clicking on a new Preset will prompt you to confirm your selection;-
Clicking 'OK' will confirm the selection and the preset will load. The Preset select window can be closed. The currently active
Preset is displayed on the Preset button;-
The Input allows the connection mode to be changed from the default which is Analogue to AES/EBU taking its feed from either
AES left or AES right or a "split" mode which feeds AES Left to the Sub and AES Right to the Main out thus allowing individual
control from two sends. This can either be done individually for each PSX or globally using the Input switch at the bottom of the
PSX overview Window. A global change will bring up the flowing window;-
MLA System User Guide V2.1
324