Martin Audio MLA User Manual page 162

MLA System
USER GUIDE
And finally for a pole mount system the maximum is 4 cabinets;-
Note that it is essential that the array design in Display 2.1 matches the physical array being used. The optimisation files that
Display creates can only be uploaded to an array that exactly matches the file. The option to create arrays that are not
multiples of four is to future proof the system for developments in system hardware that may allow powering of arrays that
are any number from two to sixteen
Finally you need to give the array a name. This is important as the D2P file created with the optimisation for that array will have
the name that you assign at this point. If you wish to try several optimisations one method is to duplicate the design adding
another array and entering the same venue and array properties but to give the array a different name that is appropriate to the
optimisation that you are attempting.
Once you have entered the array details the dashboard will change, the array details section will turn green and the design
process tabs will appear;-
You will notice on the right hand side the 'Rename' box. This gives you the opportunity to rename your array. Simply click in the
box, type in the new name and press return. The Rename box will briefly turn green and the array name will change on the tab.
Next try clicking on any of the icons other than the 'Slice'. You will find that a window appears as shown;-
This window will appear if you attempt to access any of the process icons out of sequence, meaning before the preceding process
has been completed. This feature forces you to complete the project design process in the correct, logical order. Once you have
completed each section you are then able to go back and access any of the completed parts of the design.
MLA System User Guide V2.1
162