Martin Audio MLA User Manual page 93

MLA System
The left arrow indicates that there is an alternative option available accessed by the left button (this would be the right button
if you were changing from Static to Dynamic). Press the 'Left' button brings up;-
Press Enter and you have the option to set the Ip address that you wish to use;-
You will notice that the least significant digit of the first range is underlined. Use any of the three control knobs, 'Freq', 'Q' or
'Gain' to adjust the number, then using the 'Right' button shift to the next range and adjust. Continue until the IP is in the same
range as your PC but not exactly the same for example 10.10.10.33. Press 'Enter' to return to the Network Settings submenu.
Press 'Enter' again to check that the settings are correct;-
Three presses of the 'Back' button will return you to the main menu. Power cycle the Merlin and return to the Network
Settings submenu to double check that the settings are correct.
MLA System User Guide V2.1
USER GUIDE
IP Address Type
< Dynamic
IP Address Type
IP Address :
IP Type: Static
IP Addr: 10.10.10.33
Static >
10.168.0.20 >
93