Adding Mla Compact & Dsx - Martin Audio MLA User Manual

MLA System
USER GUIDE
Note that you must enter the total number of cabinets including the MLD, NOT the number of MLA. The array will appear in the
workspace like this;-
The array is coloured red to show that it is off line. Note that the largest array that can be added is a total of 24 cabinets which
matches the maximum flown array from the flying grid. If you enter a number higher than 24 Vu-Net will enter a 24 box array.
MLX is added in the same way, you will see the same window requesting the total quantity of cabinets. Here is a six box array of
MLX, note that in off-line mode sub arrays are always entered a single column of cabinets as if flown. Device Discovery of an on-
line system gives you the option to specify ground stacked and draw the array exactly as it has been physically positioned;-
Adding MLA Compact & DSX
MLA Compact is added in exactly the same way, the only difference is that as there is no downfill enclosure you are simply asked
the total number of cabinets;-
MLA System User Guide V2.1
233