Martin Audio MLA User Manual page 322

MLA System
USER GUIDE
Either double clicking or right clicking and selecting Open will bring up the overview option for the PSX which shows all PSXs in
the project;-
This gives an overview of the state of all PSX's allowing comprehensive monitoring of the system.
The box at the top will show any names that have been assigned to the cabinets by right clicking and selecting rename (or
selecting and pressing F2 in the System Diagram;-
There are three gain faders, one for Input level and one each for control of the output of the internal sub and the external
amplifier output. Each fader has a range of +15 to -40dB. Precise values can be entered by typing directly in the box below the
fader or values can be scrolled up or down using the up/down buttons. The increments that the up/down buttons will step is
determined in the Preferences section, by default it will be 0.25dB.
The mute button will mute the cabinet irrespective of the position of the gain fader and will turn red when active.
There is comprehensive metering available with a bargraph meter for input, Sub out and Main out. The input meter registers the
level applied to the PSX up to the maximum of +18dB, the yellow and red segments indicating that the level is getting close to
the maximum. The output meters indicate level prior to limit. The yellow segments indicate the onset of limiting; the red segment
indicates 4dB of gain reduction.
MLA System User Guide V2.1
322