Martin Audio MLA User Manual page 221

MLA System
USER GUIDE
Network: The Network option is an important section for determining how devices are found on the Ethernet network;-
Running the application off line will display a blank window as shown. When you have one or more (usually at least two for MLA
and MLA Compact systems) Merlins connected their unique IP address will appear listed in the bottom 'Available IP addresses'.
You can set an IP address Filter in the smaller window which will search only for IP addresses within the range of values between
the two entered which should be separated with a comma;-
This could be used if you have two systems running on the same Ethernet network and need to control them independently.
Only devices with their IP address set to within the filter range will be found and the system will work completely independently
as if there were no other devices on the network.
Note that if you are connecting to MLA Mini, DD12 or PSX via their integral USB port, no IP address will be visible. This function
is only applicable to networks supported by Merlins.
Observation: The next available option is Observation;-
MLA System User Guide V2.1
221