Martin Audio MLA User Manual page 446

MLA System
USER GUIDE
Raise the array just enough to get the Compact clear of the floor and swing the two cabinets up pinning the 3 rd cabinet to the 2 nd
at the front on both sides;-
Remove the wheelboard then connect power to cabinets 2 and 3 but NOT 4, as we have mentioned, the Ceeform on the lower
cabinet will make it difficult to rig the next pair of Compact. Connect link cables from cabinet 2 to 3 and 3 to 4, check that they
power up correctly and that you get U-Net LEDs illuminating on all powered cabinets.
Continue to build the array in this way, preparing the next pair of cabinets, attaching to the rear bracket and swinging up the
cabinets to link at the front. Continue to cable up as you go checking for power and green U-Net LEDs;-
MLA System User Guide V2.1
446